Remove,
install BCM system or key lost new matching key, need to do key
registration function for the vehicle, and key registration steps need
to obtain and calculate the security password.This instruction show you
guide on how to use Launch X431 to read out immobilizer system security password for Nissan Sylphy 2008.For Nissan repair diagnostics work,please check here: Nissan Trouble Repair
Various adapter: Toyota 17, Toyota 22, Chrysler 6, GM 12, Honda 3,
BMW 20, Benz 38, power cable, extension lead to going to my OBD2 port
for putting the Bluetooth dongle into that could be handy, but I tend to
just chuck them in. For the main unit , I love the whist. The package
is very well protected.
Boot speed:
Autel ds808 boot up was actually quicker.
Star to diagnose Toyota Yaris 2012 with Launch x431 pros mini
Follow the on-screen instruction to choose area, car model, functions.
Traditional diagnose -> Asian -> Toyota -> submit -> 16pin
DLC -> Automatically search -> Yaris HV -> 2015.05- 2017.03
-> w /smart key -> Healthy report
This scanner will take a longer time for the tire pressure monitor.
We will see what the Autel DS808 tell us aft wards. I thinks the tire
pressure monitor ECU is quite slow on these Toyota’s, it’s finally done
it.
That’s taking me 3 minutes and 20 seconds from selecting the car.
Have vehicle diagnostic report then tap “save” them.
The scanner gives me all my car details.
Launch x431 pros mini does hot functions
Launch hide most of their hot functions in a different menu.
Compared with Autel DS808, this one is sure to choose a car.
To select traditional diagnose -> Asian -> Toyota -> submit
->history -> Toyota Yaris HV -> Control units -> All
systems- > Main body -> Special function -> Initialization
-> welcome to the Gateway Initialization utility.
Back to select “Hybrid control” -> special function ->
Initialization-> welcome to the battery current sensor initialization
utility.
Back to select “Engine and ECT” > oil reset->with intelligent key -> just follow the 1,2,3,4 tips to do.
Back to “All readiness”, just tap “Ok” to follow the on-screen message to do.
Back to “ABS/VSC/TRC” -> Special functions -> Air bleeding
Back to “All systems” -> “Tire Pressure Monitor” -> Special
function -> ID registration -> Welcome the Tire ID registration
wizard. This function will register tire IDs for the tire pressure
warning system.
Live data on the Launch
Choose Toyota V49.22 -> History ->All systems -> Engine and
ECT, then tick off : Engine oil temperature, coolant temp, long FT B1S1,
short FT B1S1, then tap “ok”, and you can select “Graph”, the graph is
really surprising quick, you can also tap “combine” there is a legend
that tells you what color is doing what. Or you can back to the values.
This article is available with all series of Autel diagnostic scanners FAQs incl. register, update, language reset, frequently asked questions and answers.
Q2:. Where is the device S/N and registering a password?
A2: Enter Product Registration to register your scanner, input the S/N
and register password (both can be found on the About page of the tool)
If failed to turn on scanner, provide S/N (on the back of the machine)
to Autel support, the engineer will send you the register password in
their server.
Q3: How to register Autel tablets MK808, MP808TS, Maxisys series?
A3: Please complete Autel tablets registration within the tablet. Press register and follow the system instructions.
Q4: How to register Autel autolink scan tools?
A4: These autel hand-held scanners don’t need to register, including
AL319，AL419，AL439, AL439B, AL539, AL539B, AL519, TS401 and MS609.
About Autel Update:
Q1: How to update Autel Maxisys, DS808, MK808, MP808TS etc tablets?
A1: Enable Autel tablet WiFi network connection or WLAN cable
connection, enter the “Update’ function, select the software you want to
update. Tap “Update” and wait until it finish.
Q2: How to update Autel scanners MD802, AL619, MD808, MaxiCheck Pro etc?
A2:
1).Download maxi pc suite to the laptop: http://support.autel.com/support/solutions/folders/8000079030
2.) Unplug the SD card (advise update by SD card rather than USB). Insert a SD card reader with laptop via USB port.
3). Run Maxi PC Suite, login, then you will get software list, please setup all programs you need.
4). Insert SD card back to the scanner and check the result.
5). If you have any problems with the update, please kindly send us the S/N and pictures with error message for troubleshooting.
autel-pc-suite-01
Q3: How to update Autel autolink AL319 AL419 AL519 scanners without S/N?
A3:
1). Download MaxiilinkII on official website: http://support.autel.com/support/solutions/folders/8000079030
2). Plug the scanner to the laptop via USB cable, run MaxilinkII
3). Choose the scanner model in MaxilinkII. Check the green icon appears on the right top corner and displays device connected.
4). In official website, choose Products- Download, download and unzip
update tool. Select the corresponding update file in maxilinkII to
update.
Note* update contains 2 parts. Make sure complete all 2 parts.
5). Update finished. Remove USB connection.
autel-pc-suite-02
About Autel Language:
Q1: How to reset language for Autel MK808, MX808, DS808, Maxisys series?
A1: Provide us S/N. Autel support team will reset language on the server.
After resetting the language on server, browse the official website and download software on Update page.
If there is no upgradeable software on Update page, run a factory reset
first (System settings—Reset—Factory reset) , then download software
under Update page.
Device language is reset when software download finished.
Q2: How to reset language for Autel hand-held scanners MD802 AL619 etc?
A2: Provide us S/N. Autel support team will reset language on the server.
After resetting language on server, format the SD card, run Maxi pc
suite and update all software again (same procedure as update).
Q3: How to update Autel autolink scanners (AL319, AL419, AL439, AL439B, AL539, AL539B, AL519 )that without S/N?
A3: Download corresponding language pack on official website. Then run MaxilinkII to update software.
More FAQs:
Q1: Why I couldn’t register Autel scanner?
A1: The most common reason is the wrong registering password (many people entered the register ID by mistake ).
Registering password: it is a 6-digit number that can be found in the “About” interface.
Better provide us whole registration interface to tell what information you entered is wrong.
Q2: Autel can read fault code but cannot clear fault code?
A2: Autel reads the fault code., You need to get problem solved, otherwise the fault code still exists.
Q3: Autel does not work on my car?
A3: If cannot work on specific model or function, it can be software or
operation issue. Please upload datalog to server with vehicle model,
year, VIN code and problem.
If all car software fail to work, check physical connection, check main test cable and VCI connection.
If a specific software fail to work, check the related OBD connector or download and install this software again.
Q4: Communication failure. How do i know if it is caused by VCI or hardware connection?
A4:
1). Connection MaxiSys host with VCI via USB to check if it communicates.
2). Test more vehicles.
3). Test EOBD software
4). Change main test cable and VCI to make a comparison.
Q5: Hand-held Autel scanner ask to obtain authorization or give error SD Card dismatch?
A5: Language incorrect or SD card (Serial number does not match, take SD card from other machine).
1). Make sure language setting is correct.
2). Format SD card and use correct Autel ID (provide us S/N to get correct ID)
3). Usually download software, format SD card can solve the problem.
Q6: Maxisys has stopped, how to reflash maxisys system?
A6: Provide us your scanner S/N, we’ll send you reflash file.
Please uncompress/unzip the files first, copy the folder “autel_factory”
or “autel_factory_dev” to an empty TF card. Insert the TF card to the
left side slot of Maxisys, restart the tool to flash the system.
Q7: How to get system log when strange system error occurs?
A7: Restart the scanner to re-produce the problem, once the problem
occurred, pls go to the home screen, click on MaxiTools button, click on
the Start button, wait for it to finish, then click on Upload to send
the log to Autel server. You can try this procedure several times to
ensure we receive the complete logs.
Firstly offer the procedure on how to set GM MDI 2 wireless connection, then solution to GM MDI 2 software error “Not connected to MDI”. This is the GM MDI 2 hardware I have: Part 1: How to set GM MDI 2 wireless connection: What to do if MDI failed to connect on Wireless interface? Check the wireless card is properly seated in the WiFi GM MDI. Confirm LEDs on the wireless card are lighted when the MDI is powered. Verify the MDI and PC are within range of the Access Point or Router. Verify that the PC is connected to the Access Point or Router. Verify signal strength of the wireless network from the PC. Check Firewall Settings on your PC USB connection takes precedence, unplug USB cable. Wired Ethernet connection takes precedence, unplug Ethernet cable. Connect to MDI using USB and run MDI Manager to verify the Wireless Settings are configured correctly. o Wireless interface is enabled. o AP settings configured for proper security (authentication, encryption). o Signal Quality (fair, good, excellent) indicates connected to AP. o The MDI, PC and AP are on the same subnet o If using static IP, verify the IP Address and Subnet mask are correct (supplied by network administrator. Part 2: GM MDI “Not connected to MDI” solution All what you need do is to refresh the GM MDI firmware. The solutions for “not connected to MDI” error
